MATERIAL SAFETY DATA SHEET

CLEAN BREAK (SUPER CLEANER)

 

1. IDENTIFICATION OF THE PREPARATION AND OF THE COMPANY

PRODUCT NAME:                                                Super cleaner

COMPANY IDENTIFICATON:                          Delaran Rooz co.

address:unit 16,no 217,st kalhor,ave navab,ave azadi,Tehran/iran                                                                                        

 EMERGENCY TELEPHON NUMBER: +9821 66947449,66947491

 

2. COMPOSITION/ INFORMATION ON INGREDIENTS

HAZARDOUS INGREDIENT    CAS NO.           EC.         Weight %      symbols      R-phrases

None  of  the  ingredients  are   listed  as  hazardous.

 

3. HAZARDS IDENTIFICATION

  EMERGENCY OVERVIEW

. Clear  brown  liquid , slight  smell  of  solvent .

. Mildly  irritating  to  eyes.

. Prolonged skin contact will result in defattening of the skin, leading to irritation and in some cases dermatitis.

. Inhalation   of  solvent  vapours  may  give  rise  to  nausea , headaches  and  dizziness.

POTENTIAL HEALTH EFFECTS:

See section11 for specific information.

 

4. FIRST-AID MEASURE

CONTACT WITH SKIN:

After  contact  with skin ,  wash  immediately  with  plenty  of  soap  and  water ( S 28)

Seek  medical  attention  if  irritation  persists.

Contaminated  clothing  should  be relaundered  before  reuse .

CONTACT WITH EYES:

If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.

Seek medical  advice  if  irritation  persists.

INGESTION:

NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRING FLUIDS!

Do  not  induce  vomiting .

Seek  immediate  medical  attention.

INHALATION:

Inhalation  is  unlikely  to  occur.

Seek  medical  attention  if ill  effects  occur  .

OTHER INFORMATION:

In case of accident or if you feel unwell, seek medical advice (show the label where possible) (S45)

 

5. FIRE-FIGHTING MEASURES

In  case  of  fire  use foam , carbon  dioxide  or  dry  agent  ( S 43)

Keep container(s) exposed to fire cool, by spraying with water.

 

6. ACCIDENTAL RELEASE MEASURES

Wear  protective  clothing  as  per  section 8.

Contain  spillage  by  any  means  possible .

Do  not  allow  to  enter  public  sewers  and  water  sources.

Absorb  spillage  in  suitable  inert  material  and  place  in  appropriate  container .

Ventilate  the  area  and  wash  spill  site  after  material  pick – up  is  complete.

 

7. HANDLING AND STORAGE

USAGE  PRECAUTIONS :

The  usual  precautions  for  handling  chemicals  should  be  observed.

Avoid  contact  with  skin & eyes.

Ensure  adequate  ventilation .

Do  not  breathe  vapour.

STORAGE  PRECAUTIONS:

Keep only in the original container in a cool, well ventilated place (S3/9/49)

Keep container tightly closed and dry (S7/8)

                                                             

8. EXPOSIN CONTROL/PERSONAL PROTECTION

EXPOSURE  GUIDELINES :

INGREDIENT  NAME                                          STD                  LT EXP             ST  EXP

                                                                                                                                                                                       ( 8  hrs)            ( 10  min )

Heavy  aromatic  solvent                                                                                                        OES                 275  mg/m3

PERSONAL  PROTECTION:

Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber) are recommended .

Wear approved respirator if exposure is likely to exceed MEL /OES.

 

9. PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL  FORM:                                                            Liquid

COLOUR:                                                                           Clear brown

ODOUR/TASTE:                                                                 Slight solvent

SOLUBILITY VALUE (g/100 g H2 O/20 C):                        Infinite

SPECIFIC GRAVITY (Water =1)                                         1.00

EVAPORATION RATE (BuAc =1)                                      Not established

VAPOUR PRESSURE (mmHg):                                           Not established

VAPOUR DENSITY (air =1):                                               Not established

MELTING POINT (C):                                                         Not established

BOILING POINT (C, at 760 mmHg):                                   100

PH – VALUE:                                                                      7-8

FLASH POINT:                                                                   Not established

FLASH METHOD:                                                              Not established

AUTO IGNITION TEMPERATURE:                                    Not established

FLAMMABILITY LIMIT: - lower %:                                   Not established

FLAMMABILITY LIMIT: - upper %:                                   Not established

 

10. STABILITY AND REACTIVITY

STABILITY:

Normally stable.

MATERIALS TO AVOID

None known.

CONDITIONS TO AVOID:

Do not store at extreme temperatures .

HAZARDOUS DECOMPOSITION PRODUCTS:

No hazardous reaction products known.

                                                                                                                                                                                                                 

11. TOXICOLOGICAL INFORMATION

TOXIC  DOSE ( LD  50  ):    Not  determined

TOXIC  CONC ( LC  50):      Not  determined

HEALTH  WARNINGS:

Mildly irritating to eyes.

Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis.

Inhalation of solvent vapours may give rise to nausea, headaches and dizziness.

    CARCINOGENESITY:

     No specific tests were done to prove that the product does not having carcinogenic effects.

 

12. ECOLOGICAL INFORMATION

This product has been evaluated on its behaviour in the environment by The TNO Institute  of  Environmental sciences (The netherlands organisation for  applied  scientific  research) .

The conclusion on CLEANBREAK reads.

This product is intended to be insoluble, hence the trade name CLEANBREAK.  Its environmental  properties,  although  sparce,  are  encouraging. The  absence  of  lower  chain  length  alkanes  ensures  low  toxicity  and  little  chance  of  bioaccumulation . Biodegradation  data  would  be  desirable  in  future   for  a  complete  evaluation . however,  the  results  of  the  hydrocarbon   families calculation  method  is  sufficient  at  present  to catagorise  the  ingredients satisfactorily within the new IMO regulations.

 

 

13. DISPOSALCONSIDERATION

This  material  and   its  container  must  be  disposed  of  in  a  safe  way.

Disposal  should  be  in  accordance  with  local , state or  national  legislation..

 

14. TRANSPORT INFORMATION

DOT (Department of transportation):

        PROPER  SHIPPING  NAME:                        NONE

HAZARDOUS  MATERIA:                              NONE

HAZARD  CLASS:                                           UNREGULATED

IDENTIFICATION  NUMBER:                         NONE

PRODUCT   RQ (Ibs)             NOT   APPLICABLE

IMO (international maritime organization)

PROPER  SHIPPING  NAME:                           NONE

HAZARD  CLASS:                                           UNREGULATED

PACKAGING  GROUP:                                    NOT  APPLICABLE

IDENTIFICATION  NUMBER:                         NONE

MFAG:                                                             NONE

ADR

     UN  NO:                                                             NONE

ADR  CLASS NO:                                                          UNREGULATED

ADR  item   NO:                                                 NONE

CEFIC  TEC ( R) NO:                                         NONE

LABEL  FOR  CONVEYANCE:

     Corrosive.

 

15. REGULATORY INFORMATION

LABEL  FOR  SUPPLY:

None

RISK  PHRASES:

None.

SAFETY  PHRASES:

Wear  suitable  protective  clothing ,  gloves   and  eye/face  protection. (S36/37/39)